10G/Multi-Gigabit Dual WAN Pro Router Model PR60X
Front panel with system LEDs
The following figure shows the front panel of the router.
Figure 1. Front panel
The following table describes the LEDs.
Table 1. LEDs on the front panel
LED
Description
Power LED
Solid green: The router is ready.
Solid amber: The router is starting. (Solid amber lasts for about one minute.)
Blinking amber: The firmware is being updated.
Off: Power is not supplied to the router.
Internet LED
Solid green: The Internet connection is established.
Solid amber: No Internet connection is established.
Blinking amber: The Internet connection is in the process of being set up.
Off: No link is established on the WAN1 port, or if you set up dual WAN connections
and a failover occurred, on the WAN2 port.
Cloud LED
Off: The router functions in standalone mode or, if deployed in Insight mode, it is not
connected to the Insight Cloud.
Solid blue: The router functions in Insight mode and is connected to the Insight cloud.
SFP+ LED
Solid green. The SFP or SFP+ link is up.
Off. No SFP or SFP+ link is established.
Hardware Overview
11
Hardware Installation Guide