Table of Contents
Advertisement
Preparing the Remote Control
nInstall the remote control batteries
The remote control is powered by two 1.5 V AAA batteries.
To install or replace batteries:
NOTE:
• If you do not intend to use the remote control for a long period of time, remove the batteries.
• Use manganese or alkaline batteries only.
nOperating Range for the Remote Control
Point the top of the remote control toward the monitor's remote control sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.) from the remote
control sensor, or at a horizontal and vertical angle of within 30° and within a
distance of about 3.5 m (10 ft.).
TIP:
The remote control system may not function when direct sunlight or strong
illumination strikes the remote control sensor, or when there is an object in the
path.
Handling the remote control
•
Do not expose to strong shock.
•
Do not allow water or other liquid to splash on the remote control.
If the remote control gets wet, wipe it dry immediately.
•
Avoid exposure to heat and steam.
•
Except to install the batteries, do not open the remote control.
1
2
English−18
3
Advertisement
Table of Contents
