Basic Operation - Sharp MultiSync ME652 User Manual

Large format display
Table of Contents

Advertisement

1
2
3
4
8
9
0
!
@
$
%
&

TIP:
• The buttons with no explanation are not used with
your monitor model.
 • Some Remote Control buttons are used for
CEC (Consumer Electronics Control).
Please see
page
1
POWER ON and STANDBY Buttons
POWER ON resumes full power from low power mode.
STANDBY puts the monitor in low power mode.
See
page
19.
2
DIRECT INPUT Buttons
Immediately changes the input to the one named on the
button.
The button names reflect the factory preset name for the
input.
3
KEYPAD
Press the buttons to set and change passwords, IP address,
the channel, and set the REMOTE ID. See
Some buttons are used for the CEC and the MediaPlayer
function ("MediaPlayer" on
The – (hyphen) button is the same means as ". (dot)". The
ENT button works as backspace.

Basic Operation

5
7
6
#
^
*
57.
page
40.
page
30).
4
DISPLAY Button
Shows/Hides the information OSD.
Input name
Input Signal Information
HDR Information
Communication Info*
* Shows when [Communication Information] is checked.
Green: Connected LAN.
Red: Not connected LAN.
Unlocks the remote control's buttons if they have been
locked in the [Lock Settings] in the [Protect] menu.
Press and hold the DISPLAY button for more than five
seconds to unlock the remote. See
5
MENU Button
Opens and closes the OSD menu. See
6
EXIT Button
Acts as a back button within the OSD to move to the
previous OSD menu.
Acts as an EXIT button to close the OSD menu when on the
main menu.
7
/ Button (up/down button)
Acts as navigation buttons to move the highlighted area up
or down.
8
/ Button (left/right button)
Acts as navigation buttons to move the highlighted area left
or right.
Increases or decreases the adjustment level within the
selected OSD menu setting.
9
SET Button
When the OSD menu is open, this button acts as a set
button when you make a selection.
0
INPUT Button
Opens and closes the INPUT menu.
The input names reflect the factory preset name for the input
unless they are manually renamed in the OSD menu.
English−21
HDMI
3840 x 2160@60Hz
H
page
38.
page
24.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync me552Multisync me502Multisync me432

Table of Contents