Supplied Components; Preparing The Remote Control Unit - Sharp PN-H701 Setup Manual

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp: 4
 Cable clamp (insertion type): 2
 Power cord
 LR-6 battery ("AA" size): 2
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit

1. Press the cover gently and slide it in the direction of the arrow.
2. See the instructions in the compartment and put in the supplied batteries (LR-6 ("AA" size) x 2) with their plus (+) and minus (-)
sides oriented correctly.
3. Close the cover.

Supplied Components

 CD-ROM (Utility Disk for Windows): 1
 Setup Manual (this manual): 1
 Power cord clamp: 1
 Power cord clamp screw: 1
 USB flash drive cover: 1
 USB flash drive cover screw: 1
 Horizontal sticker (Logo): 1
 Vertical sticker (Operation panel): 1
 RS-232C conversion cable (3.5 mm mini jack): 1
 USB extension cable: 1
5
E