FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning...
• Follow the maximum number of 14 place settings. • The appliance door should not be left in an open position to avoid the tripping hazard. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
Page 5
Make sure that there is access to the consequences and might void the mains plug after the installation. guarantee. • Do not pull the mains cable to disconnect • The following spare parts will be available the appliance. Always pull the mains plug. for 7 years after the model has been discontinued: motor, circulation and drain 2.3 Water connection...
Authorized Service Centre to replace it with the new one. 3.1 Building in www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
4. PRODUCT DESCRIPTION Ceiling spray arm Lower basket Upper spray arm Upper basket Lower spray arm Cutlery drawer Filters Rating plate The graphic is a general overview. For Salt container more details, refer to other chapters or documents provided with the appliance. Air vent Rinse aid dispenser Detergent dispenser...
5. CONTROL PANEL On/Off button / Reset button ExtraPower option button Delay start button AUTO Sense program button Indicators MY TIME program selection bar 5.1 Indicators Indicator Description ECO programme indicator. It indicates the most environmentally friendly programme selec‐ tion for a normally soiled load. Refer to "Programme selection". Rinse aid indicator.
Page 9
6.2 AUTO Sense ExtraPower The AUTO Sense programme automatically ExtraPower improves the dishwashing adjusts the dishwashing cycle to the type of results of the selected programme. The load. option increases the wash temperature and The appliance senses the degree of soil and duration.
Consumption values Water (l) Energy (kWh) Duration (min) Programme 1)2) 30min 11.0 0.610 90min 11.9 1.060 10.5 0.746 AUTO Sense 12.0 1.230 Machine Care 0.600 The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
Page 11
How to change a setting Make sure the appliance is in setting mode. 1. Press Previous or Next until the indicator dedicated to the desired setting flashes. The light related to indicates the current setting value: • For the settings with two values (on and off), the light is either on (= the setting is on) or off (= the setting is 7.1 Setting mode...
Page 13
Each performed softener rinse (possible more than one in the same cycle) may prolong the programme duration by another 5 minutes when it occurs at any point at the beginning or in the middle of a programme. All the consumption values mentioned in this section are determined in line with the currently applicable standard in laboratory conditions with water hardness...
8. BEFORE FIRST USE 1. Make sure that the current level of the 5. Remove the salt around the opening of water softener agrees with the the salt container. hardness of the water supply. If not, adjust the level of the water softener. 2.
3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. You can turn the selector of the released 4. Close the lid. Make sure that the release quantity (B) between position 1 (lowest button locks into position. quantity) and position 4 or 6 (highest quantity).
Page 16
The appliance returns to the programme selection. Activating ExtraPower increases the water and energy consumption as well as the programme duration. Make sure that there is detergent in the detergent dispenser before you start a 9.4 How to start the AUTO Sense new programme.
10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use and to • Only use salt, rinse aid and detergent protect the environment. designed for dishwasher.
4. When the programme is completed, and unprotected carbon steel. This can adjust the water softener according to the cause them to crack, warp, discolour, pit water hardness in your area. or rust. 5. Adjust the released quantity of rinse aid. •...
Page 19
11.5 Cleaning the filters 2. Press and hold simultaneously The filter system is made of 3 parts. for about 3 seconds. The indicators flash. 3. Close the appliance door to start the programme. When the programme is complete, the indicator is off.
Page 20
CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
Page 21
11.7 Cleaning the upper spray arm 2. Move the upper basket to the lowest level Do not remove the upper spray arm. If the to reach the spray arm more easily. openings in the spray arm are clogged, 3. To detach the spray arm (C) from the remove the remaining particles of soil with a delivery tube (A), turn the mounting thin pointed object, e.g.
12. TROUBLESHOOTING Refer to the below table for information on WARNING! possible problems. Improper repair of the appliance may With some problems, the lights related to pose a danger to the safety of the user. MY TIME selection bar flash intermittently to Any repairs must be performed by indicate a malfunction and the alarm code.
Page 23
Problem and alarm code Possible cause and solution Malfunction of the water level detec‐ • Make sure that the filters are clean. tion sensor. • Switch the appliance off and on. • The lights related to MY TIME selection bar flash 4 times inter‐ mittently.
Page 24
Problem and alarm code Possible cause and solution The appliance door is difficult to • The appliance is not levelled. Loosen or tighten the adjustable feet (if close. applicable). • Parts of the tableware are protruding from the baskets. The appliance door opens during •...
Page 25
Problem Possible cause and solution There are whitish streaks or bluish lay‐ • The released quantity of rinse aid is too high. Adjust the rinse aid ers on glasses and dishes. dosage to a lower level. • The quantity of detergent is too high. There are stains and dry water drops •...
Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min.