Canon ImagePRESS Server H350 V2 Service Manual page 108

7.
M3x6
8.
NOTE:
Use the screws removed in steps 4, 5, and 6.
M3x6
1x
6x
1x
10.
2x
101
8. INSTALLATION PROCEDURE
9.
CAUTION:
• Uniformly push in the Main Controller PCB 2 with
both hands until it stops.
• Install the Main Controller PCB 2 while paying
attention not to trap cables.
CAUTION:
• Be sure to turn over the 2 Lock Levers, and push
in the Main Controller PCB 2.
• When installing the screws, install the lower screw
first and then the upper one.
• Be sure to perform the work in the order from 1 to
5 in the figure because the connector of the Main
Controller PCB 2 may not be connected.
2x