1
2
1. Indicator
2. Start/Stop button
EMU41633
All Start/Stop switch panel (optional)
The Start/Stop button allows all engines to
start or turn off.
1
1. All Start/Stop button
EMU35775
Engine shut-off cord (lanyard) and clip
The clip must be attached to the engine shut-
off switch for the engine to run. The cord
should be attached to a secure place on the
operator's clothing, or arm or leg. Should the
operator fall overboard or leave the helm, the
cord will pull out the clip, stopping ignition to
the engine. This will prevent the boat from
running away under power.
EWM01791
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg while operating.
Do not attach the cord to clothing that
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could cau-
se people and objects in the boat to be
thrown forward.
TIP:
The engine cannot be started with the clip re-
moved.
1
1. Engine shut-off cord (lanyard)
Components
31