Components
EMU41553
Main switch
The main switch controls the ignition system;
its operation is described below.
"
" (off)
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
"
" (on)
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed. The engine can be started
by pressing the Start/Stop button.
"
" (start)
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
ON
OFF
ON
OFF
34
" (off) posi-
" (on) position,
" (start) po-
" (on) position.
START
ZMU07145
ZMU07146
EMU41622
Start/Stop switch panel
The engine can be started or turned off by
pressing the Start/Stop button. For twin type,
it is possible to start or turn off individual en-
gine. The indicator for the corresponding en-
gine will come on.
PORT:Port side engine
STBD:Starboard side engine
1
2
1. Indicator
2. Start/Stop button
EMU41632
All Start/Stop switch panel
The Start/Stop button allows all engines to
start or turn off.
1
1. All Start/Stop button
EMU35154
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, and then tilts it up. Press-
ZMU07174
ZMU07176
" (up) trims the