F
4
2
6
5
7
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
6. Throttle
7. Fully open
EMU49002
Power trim and tilt switches
Pushing the switch "
board motor up, and then tilts it up. Pushing
the switch "
" (down) tilts the outboard mo-
tor down and trims it down. When the switch
is released, the outboard motor will stop in its
current position.
For multiple engine applications, the switch
on the control lever controls all outboard mo-
tors at the same time.
Single engine
UP
1
DN
1. Power trim and tilt switch
N
R
1
4
3
6
5
7
" (up) trims the out-
Twin engines
UP
1
DN
1. Power trim and tilt switch (all engines)
2. Power trim and tilt switch (starboard side
engine)
3. Power trim and tilt switch (center engine)
4. Power trim and tilt switch (port side engine)
TIP:
The power trim and tilt switch of the center
engine can be used to control triple engines.
EMU48491
DEC alert indicator
The alert indicator changes from blue to or-
ange if a connection problem between the di-
gital electronic control and the outboard
motor occurs. A beep also sounds (repeated-
ly on and off) to alert the operator. For more
information, consult your Yamaha dealer.
Components
DN
2 3 4
UP
25