Single Lever Switch; Trim Assist Switch - Yamaha F150 Owner's Manual

Twin engines
2
1
1. "NEUTRAL HOLD" switch
2. LED
EMU48550

Single lever switch

For multiple engines, when the "SINGLE LE-
VER" switch is pressed, the buzzer will
sound, the LED will come on, and the port
side control lever will allow you to perform
shift and throttle operations for all outboard
motors that have been started. For further in-
formation, see page 59.
TIP:
 When the single lever switch is activated,
the starboard control lever is inoperable.
 You must start all the engines to enable the
single lever switch.
Twin engines
1. "SINGLE LEVER" switch
2. LED
EMU49271

Trim Assist switch

This function automatically sets the outboard
motor trim angle according to the engine
speed.
Enabling the trim assist switch allows the trim
assist function to operate.
TIP:
For more information on the "Trim Assist"
function, see the 6X9 DIGITAL ELECTRONIC
CONTROL operation manual.
2
1
1. "TRIM ASSIST" switch
2. LED
2
2
1
1
1. "TRIM ASSIST" switch
2. LED
To set
When the "TRIM ASSIST" switch is pressed,
the beep sounds and the LED turns on.
To release
When the "TRIM ASSIST" switch is pressed,
the beep sounds and the LED turns off.
Components
27