Power Trim And Tilt Switches (Twin Type); Tilt Limiter; Tilt Support Lever For Power Trim And Tilt Model - Yamaha F350A Owner's Manual

NOTE:
For instructions on using the power trim and
tilt switch, see page 43.
EMU35160
Power trim and tilt switches (twin
type)
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pushing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch " " (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position.
UP
1
DN
1
1. Power trim and tilt switch
On the twin engine control, the switch on
G
the control grip controls both outboard mo-
tors at the same time.
For instructions on using the power trim
G
UP
DN
ZMU05823
" (up) trims the
UP
ZMU05835
DN
Basic components
and tilt switches, see pages 41 and 43.
EMU35040

Tilt limiter

This outboard motor is equipped with a tilt
limiter that controls the tilt range.
NOTE:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
1
ECM00660
CAUTION:
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ZMU05824
22