Cisco Firepower 1010 Getting Started Manual page 49

Firepower Threat Defense Deployment with CDO
a) Under System Settings, click Cloud Services.
b) Click Get Started in the Cisco Defense Orchestrator group.
c) In the Region field, choose the Cisco cloud region to which your tenant is assigned:
d) In the Registration Key field, paste the registration key that you generated in CDO.
e) Click Register and then Accept the Cisco Disclosure. FDM sends the registration request to CDO.
Step 9
Return to CDO. In the Smart License area, apply your Smart License to the FTD device and click Next.
For more information, see
90-day evaluation license.
Step 10
In the Done area, click Go to devices to view the onboarded device.
Step 11 On Devices & Services, observe that the device status progresses from "Unprovisioned" to "Locating" to
"Syncing" to "Synced".
Onboard an FTD Using Credentials and IP Address
You can onboard an FTD using login credentials (username and password) and the IP address or FQDN.
However, we recommend that you onboard your device with a registration key because it is not dependent
on a static IP address and does not require an on-premises SDC; see
Key (Recommended), on page
Before you begin
• You can use this method to onboard your device to the US, EU, or APJ regions.
• Your device MUST be managed by Firepower Device Manager (FDM). Make sure that there are no
• Your device can use either a 90-day evaluation license or it can be smart-licensed. You will not need to
• We recommend that you deploy an on-premises Secure Device Connector (SDC) connected to the inside
• Configure the interface used for CDO management/SDC communication with a static IP address, or use
All manuals and user guides at all-guides.com
• Choose US if you log in to defenseorchestrator.com.
• Choose EU if you log in to defenseorchestrator.eu (Version 6.5).
• Choose APJ if you log in to apj.cdo.cisco.com (Version 6.5).
Configure Licensing, on page
42.
pending changes waiting on the device.
unregister licenses installed on the device from the Cisco Smart Software Manager.
interface. Alternatively, if you want to use a cloud SDC through the outside interface, you need to allow
HTTPS access on outside (FDM System Settings > Management Access), which is not recommended
for security reasons. For more information about the SDC, see
with Firepower Threat Defense, on page
Dynamic DNS (DDNS) to maintain a consistent FQDN. You can configure DDNS in FDM.
Onboard an FTD Using Credentials and IP Address
49. Click Skip to continue the onboarding with a
Onboard the FTD with a Registration
How Cisco Defense Orchestrator Works
26.
Cisco Firepower 1010 Getting Started Guide
47