Inventory - Grizzly G0637HEP Manual

Inventory

Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
After all the parts have been removed from the
boxes, you should have the following items:
Inventory: (Figures 10–14)
A. Upper Stand Braces ................................... 4
B. Upper Stand Legs ...................................... 4
C. Filter Brace Supports (Long) ...................... 2
D. Control Box Bracket ................................... 1
E. Cyclone Mounting Brackets........................ 4
F.
Lower Stand Legs ...................................... 4
G. Filter L-Braces ............................................ 2
H. Filter Brace Support (Short) ....................... 1
I.
Lower Stand Braces ................................... 4
A
B
D
F
E
Figure 10. Model G0637/G0638 inventory A–I.
-18-
Qty
C
I
G
H
J.
Intake Cylinder ........................................... 1
K. Outlet Port .................................................. 1
L. Cyclone Funnel (Large) .............................. 1
M. Intake Barrel ............................................... 1
N. Cyclone Funnel (Small) .............................. 1
O. Funnel Port ................................................. 1
J
K
M
Figure 11. Model G0637/G0638 inventory J–O.
P. Blower Housing with Motor ........................ 1
Q. Control Box ................................................. 1
R. Remote Control .......................................... 1
S. Collection Drum Lid Latches ...................... 6
T.
Casters 2" ................................................... 8
U. Collection Drum Lids .................................. 2
V.
Upper Collection Drum Cylinders ............... 2
W. Collection Drum Clamps ............................ 2
X. Lower Collection Drum Cylinders ............... 2
P
Q
R
S
T
Figure 12. Model G0637/G0638 inventory P–X.
Model G0637/G0638 (Mfd. Since 04/12)
L
N
O
U
V
W
X