Inventory - Grizzly G0777 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 Inventory (Figures 12–14):
A. Dust Collector, Motor, & Filter Assembly .... 1
B. Remote Control .......................................... 1
C. Intake Barrel ............................................... 1
D. Collection Drum .......................................... 1
E. Cyclone Funnel .......................................... 1
F. Stand .......................................................... 1
G. Collection Drum Bag Seat .......................... 1
H. Collection Drum Lid .................................... 1
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Model G0777/G0777HEP (Mfd. Since 04/19)
A
Figure 12. Box 1: Dust collector assembly and
Qty
controls (G0777HEP shown).
C
Figure 13. Box 1: Intake barrel.
D
G
Figure 14. Box 1: Stand and collection drum
B
E
F
E
components.
H
-19-