Lenovo ThinkStation P5 Manual page 10

7. Reinstall the heatsink on top of the M.2 drive within the carrier by inserting
the feet on one side of the heat sink into the openings of two of the tabs on
one side of the carrier. Then press down on the other side of the heat sink
until the feet engage the tabs on the heatsink.
8. Insert the M.2 bracket back into the onboard M.2 slot at a slight 15-degree
angle.
Caution: Be careful not to use excessive force as this risks breaking the M.2
slot.
9. Gently lower the carrier and push on the edge of the red latch to rotate the
latch clockwise and secure the M.2 carrier in the system.
10