Chapter 3 Basic Operations — Switching on/off the projector
How to remove the power cord
1)
Confirm that the <主电源> switch on the side of the projector is on the <关> side, and remove the
power plug from the outlet.
2)
Raise the power cord holder fixing the power cord upward. (Fig. 1)
f Fix the power cord holder by snapping into the projector.
3)
While holding the power cord connector, pull out the power cord from the <电源接口> terminal of the
projector. (Fig. 2)
50 - ENGLISH
Fig. 1
Fig. 2