Table of Contents
Advertisement
Sending status content via E-mail
The status content can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page"
(x page 171).
1)
Press the <执行> button while the 1/5 to 4/5 page of the [STATUS] screen is displayed.
f The [SELECT E-MAIL ADDRESS] screen is displayed.
2)
Press as to select the destination.
3)
Press the <执行> button.
f The confirmation screen is displayed.
4)
Press qw to select [OK], and press the <执行> button.
f The status content is sent.
[INFO MONITOR SETTING]
Set the information monitor of the control panel.
For operation of the information monitor, refer to "Using the information monitor function" (x page 180).
Setting the display during normal status
Display/hide the information monitor during no operation.
1)
Press as to select [INFO MONITOR SETTING].
2)
Press the <执行> button.
f The [INFO MONITOR SETTING] screen is displayed.
3)
Press as to select [DEFAULT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[USER VIEW]
Note
f Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 180).
Setting the information to display
Set the items to display on the information monitor during no operation.
1)
Press as to select [INFO MONITOR SETTING].
2)
Press the <执行> button.
f The [INFO MONITOR SETTING] screen is displayed.
3)
Press as to select [USER VIEW].
4)
Press the <执行> button.
f The [USER VIEW] screen is displayed.
5)
Press as to select each item.
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[OSD]
Chapter 4 Settings — [PROJECTOR SETUP] menu
Does not display the information.
Displays the items set in the [PROJECTOR SETUP] menu → [INFO MONITOR SETTING] → [USER
VIEW].
Currently selected input terminal
Input signal name
Input supply voltage
Intake air temperature of the projector
Exhaust air temperature of the projector
Status of the shutter ([CLOSE]: Shutter function enabled; [OPEN]: Shutter function disabled)
Status of the on-screen display function ([ON]: Display; [OFF]: Hide)
ENGLISH - 141
Advertisement
Table of Contents
