Physical Presence
Spec Version
Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Note some HCK tests might not
support 1.3
Device Select
TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0
devices, Auto will support both with the default set to TPM 2.0 devices if not found,
TPM 1.2 devices will be enumerated.
Disable Block Sid
Override to allow SID authentication in TCG Storage device
Chapter 3 – AMI BIOS Setup
1.3
1.2
Auto
TPM 1.2
TPM 2.0
Disabled
Enabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
44