Pause Mode; Sleep Mode - Black & Decker BEV BCHB101 Instruction Manual

Fig. J
22
Making a Drink (Fig. F–J)

WARNING: To ensure liquor is not dispensed while
making a mocktail, lift straw locks
bottles and keep the water bottle straw lock down.
1. Turn the cocktail maker on as described in the ON/
OFF section.
2. Place a glass or shaker on the glass shelf
cover 9 depending on its height as described in the
CHOOSE A GLASS TRAY section.
3. Insert the desired capsule
as described in the INSERTING CAPSULE section.
4. Turn the strength selector dial
content as described in the SELECT ALCOHOL
STRENGTH section.
5. Press the mix button
The bottle LEDs 24 under each bottle will light as its
liquid is being dispensed.
6. When completed, the mix button and bottle LEDs will go off
and the drink LED 32
7. Remove the capsule before removing the glass. The capsule
may drip when it is being removed or if left in the holder.
nOTE: While making a drink, if the power button is turned off, the
appliance is unplugged, or after two minutes in pause mode, the
mixing process will be reset, ending the mixing of the current drink.
If this happens, a small amount of alcohol may remain in the internal
lines. To ensure the next drink is not mixed with this remaining
alcohol, clean the lines as described in the CLEANING MODE section
before mixing another drink. To resume making the drink while in
pause mode, refer to the PAUSE MODE section.
nOTE: If the cocktail maker continues to dispense to the
point of overflow, turn the appliance off, lift the straw lock, or
lift the capsule holder lid
Bottle Runs Out During Mixing (Fig. C, D)
If a bottle runs out of liquid while the cocktail maker is
mixing a drink:
• The cocktail mixer will enter pause mode for 2 minutes to
allow you to replace the empty bottle. Refer to the PAUSE
MODE section for more information.
• Do not turn the power switch
reset the mixing process and the cartridge will no longer
be able to be used.
nOTE: The unit will not flush the lines while the capsule
holder lid 28 is lifted.
To replace the empty bottle:
1 5 for the alcohol
11 or drip tray
26 into the capsule holder
33 to set the alcohol
34 once. The mix button will pulse.
will turn on.
28 .
20 off. Turning it off will
1. Remove the bottle as described in the REMOVING
BOTTLES section.
2. Install the a new bottle as described in the INSTALLING
BOTTLES section.
3. Press the mix button
33
from where it left off.

Pause Mode

34
Pause mode lasts for 2 minutes. The strength LEDs
light to indicate the time remaining.
3 solid, 1 flashing
2 solid, 1 flashing
1 solid, 1 flashing
1 flashing
• Press and hold the mix button for 3 seconds to cancel
pause mode.
• If the LED countdown finishes before the drink mixing
resumes or pause mode is cancelled, the unit will pump
a small amount of water to flush the lines. The cocktail
27
maker will reset to its original mode and the drink will
no longer be mixed. If there is no water loaded into the
cocktail maker, the unit will flush the lines with air.
nOTE: The unit will not flush the lines while the capsule
holder lid 28
Pause mode is triggered three ways.
• The mix button is pressed.
‑ Press the mix button once more to resume.
• The capsule holder lid is open.
‑ Close the lid and press the mix button.
• A bottle runs out of liquid
‑ Replace the empty bottle as described in the BOTTLE
RUNS OUT DURING MIXING section.

Sleep Mode

The cocktail maker will go to sleep after 30 minutes. Any
interaction will reset the sleep timer (e.g. lifting capsule
holder lid 28
Setting Lighting Mode LEDs (Fig. K)
The lighting mode button/dial
on and off, and set LED color.
1. Turn the lighting dial to adjust the LED colors, including
the multi‑color option.
2. Press the lighting button once for Party Mode.
3. Press the lighting button a second time to turn bottle
LEDs off.
4. Press the lighting button a third time to return all bottle
LEDs to on.
To return the LEDs to default settings, press and hold the
lighting button for 3 seconds.
34 to resume mixing the drink
1:30 ‑ 2 min. remaining
1 ‑ 1:30 min. remaining
30 sec. ‑ 1 minute remaining
less than 30 sec.
is lifted.
or turning the power switch
35 allows you to turn LEDs
English
22 will
20 off and on).
9