Table of Contents
Advertisement
Available languages
Available languages
English
3. Place a shaker on the drip tray cover.
Fig. G
25
11
Inserting a Capsule (Fig. A, H, I)
WARNING: Cut Hazard. Do not probe capsule holder
area with fingers.
WARNING: Pinch point. Keep away from capsule
holder when closing capsule holder lid.
WARNING: Use only Bartesian capsule. Use with any
other capsule may result in damage to the appliance.
iMPORTAnT: Do not open capsule
iMPORTAnT: Once the capsule is punctured, it may drip
liquid. To avoid this, place a capsule in the capsule holder
just before mixing a drink.
1. Before inserting a capsule, place a glass or shaker on the
glass shelf
11
or drip tray
GLASS TRAY section
2. Select the capsule you wish to use.
3. To open the capsule holder, lift the capsule holder lid
until it clicks into place. The capsule LED
4. Ensure the bar code
debris. Wipe your thumb across the bar code before
inserting capsule into capsule holder.
5. Place the capsule in the capsule cup
holder. Ensure the capsule tab
cocktail maker will not operate if the capsule is inserted
any other way.
6. Ensure the capsule sits fully in the capsule cup.
8
23
9
26
.
7
as described in the CHOOSE A
31
will turn on.
39
is clean from liquid and
29
located in the
30
faces to the left. The
Fig. H
29
nOTE: The scanner inside the capsule holder scans the code
on top of the capsule. This allows the cocktail maker to pull
from the correct bottles so it dispenses the correct drink.
7. Push the capsule holder lid down to close the capsule holder
until it clicks. Ensure the lid is fully closed before operating.
nOTE: If the capsule code is successfully read, the mix button
34
will illuminate. The bottle LEDs
bottles required for the recipe and under each bottle as it is
being dispensed. Ensure each bottle is in its correct place.
nOTE: If mix button does not illuminate, lift the capsule
holder lid
28
and use a clean, dry towel to wipe the barcode
scanner
40
and the capsule barcode
repeat step 6.
27
Fig. I
28
Select Alcohol Strength (Fig. J)
To select the amount of alcohol to be dispensed into the
drink, turn the strength selector dial
•
left: less alcohol
Right: more alcohol
•
The strength LEDs
selector, indicating the strength of the drink.
•
‑ mocktail (no alcohol)
•
‑ light alcohol content
•
‑ regular alcohol content
•
‑ strong alcohol content
28
27
30
24
will light under the
39
as shown in Fig. I. Then,
33
.
22
will turn on and off as you turn the
26
40
39
Advertisement
Table of Contents
