OPERATION
6
6.4.3 Diagnosis messages
These settings make it possible to change the status signal of the respective diagnosis message
(status group).
6.4.4 Optical keys
This function can deactivate the optical keys. In the display, the switched off state of the optical
keys is represented by a lock 1.
Figure 6-7: Indicator for optical keys in the display
1 "Lock" indicate that optical keys are switched off
.
6.4.5 Graphic page
With this converter, the trend of the main measurement can be graphically displayed. The first
measurement on display page 1 is always defined as the main measurement.
• Menu C7.5.1 defines the range for the trend indicator (manual or automatic).
• Menu C7.5.2 defines the range for manual setting.
• Menu C7.5.3 defines the time span for the trend indicator.
6.4.6 Save settings
This function allows all settings to be stored in a memory.
• Backup 1: Saves settings in backup memory area 1
• Backup 2: Saves settings in backup memory area 2
6.4.7 Load settings
This function allows the complete stored settings to be loaded again.
• Backup 1: Loading from backup - memory 1
• Backup 2: Loading from backup - memory 2
• Factory: Uploading the original factory settings
142
www.process.honeywell.com
VERSAFLOW SONIC 1000/TWS 9000
34-VF-25-07 iss.2 GLO Nov 11 US