Table of Contents
Advertisement
Cordless Blower Safety Instructions
WARNING:
Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
Training
1.
Read the instructions carefully. Be familiar with
the controls and the correct use of the machine.
2.
Never allow children, persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar
with these instructions to use the machine. Local
regulations may restrict the age of the operator.
3.
Never operate the machine while people, espe-
cially children, or pets are nearby.
4.
Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
Preparation
1.
Always wear substantial footwear and long
trousers while operating the machine.
2.
Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long hair
away from the air inlets.
3.
Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
4.
To prevent dust irritation the wearing of a face
mask is recommended.
5.
While operating the machine, always wear non-
slip and protective footwear. Non-skid, closed-toed
safety boots and shoes will reduce the risk of injury.
6.
Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
Operation
1.
Switch off the machine and remove the battery
cartridge and make sure that all moving parts
have come to a complete stop
•
whenever you leave the machine.
•
before clearing blockages.
•
before checking, cleaning or working on
the machine.
•
if the machine starts to vibrate abnormally.
whenever you convert the machine from
•
blower to vacuum, and vice versa.
2.
Operate the machine only in daylight or in
good artificial light.
3.
Do not overreach and keep proper balance and
footing at all times.
4.
Always be sure of your footing on slopes.
Walk, never run.
5.
6.
Keep all cooling air inlets clear of debris.
7.
Never blow debris in the direction of bystanders.
Operate the machine in a recommended posi-
8.
tion and on a firm surface.
9.
Do not operate the machine at high places.
10. Never point the nozzle at anyone in the vicinity
when using the machine.
11.
Never block suction inlet and/or blower outlet.
•
Be careful not to block suction inlet or blower out-
let with dust or dirt when operating in dusty area.
•
Do not use nozzles other than the nozzles
provided by Makita.
•
Do not use the blower to inflate balls,
rubber boat or the similar.
12. Do not operate the machine near open window, etc.
13. Operating the machine only at reasonable hours
is recommended - not early in the morning or
late at night when people might be disturbed.
14. Using rakes and brooms to loosen debris
before blowing is recommended.
15. If the machine strikes any foreign objects or should
start making any unusual noise or vibration, imme-
diately switch off the machine to stop it. Remove
the battery cartridge from the machine and inspect
the machine for damage before restarting and
operating the machine. If the machine is damaged,
ask Makita Authorized Service Centers for repair.
16. Do not insert fingers or other objects into
suction inlet or blower outlet.
17. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
machine. Carrying the machine with your fin-
ger on the switch or energizing the machine
that has the switch on invites accidents.
18. Never blow or vacuum dangerous materials,
such as nails, fragments of glass, or blades.
19. Do not operate the machine near flammable materials.
20. Avoid operating the machine for a long time in
low temperature environment.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure
1.
the machine is in safe working condition.
2.
If the parts are worn or damaged, replace them
with parts provided by Makita.
5 ENGLISH
Advertisement
Table of Contents
