12
SERVICE WORK ON THE CHASSIS
12.16
Removing the front fender
12.17
Installing the front fender
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
M00376-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
M00376-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
and
. Remove the front fender.
M6
p. 86)
p. 83)
and
.
10 Nm (7.4 lbf ft)
p. 84)
50