Table of Contents
Advertisement
11
TUNING THE CHASSIS
11.14
Handlebar position
11.15
Adjusting the handlebar position
1
1
1
0 0 1
2
0 0 2
2
0 0 2
Guideline
Rebound damping (All TE 125)
Comfort
Standard
Sport
Rebound damping (All TE 250/300)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
On the upper triple clamp, there are two holes a distance of
Hole distance A
The holes on the handlebar support are placed at a distance of
Hole distance B
The handlebar can be mounted in four different positions. In this way, the handlebar can
be mounted in the position that is most comfortable for the rider.
800116-10
–
Remove screws
to one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar support in the required position. Mount and tighten screws
B00375-10
Guideline
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and tighten screws
Guideline
Screw, handlebar clamp
Info
Ensure that the gap widths are even.
15 clicks
13 clicks
11 clicks
15 clicks
13 clicks
11 clicks
15 mm (0.59 in)
3.5 mm (0.138 in)
. Remove the handlebar clamp. Remove the handlebar and lay it
. Remove the handlebar support.
M10
M8
apart.
from the center.
40 Nm
Loctite
®
243™
(29.5 lbf ft)
.
20 Nm (14.8 lbf ft)
42
.
Advertisement
Table of Contents
