Equipment Requirements; Slide Rail Adjustment Range; Server Specifications; Physical Specifications - Cisco 3500 Series Installation Manual

Before You Begin
The rack must be of the following type:
• A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
• The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or #10-32
• The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).

Equipment Requirements

The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails
(mounting brackets) are pre-attached to the sides of the server.

Slide Rail Adjustment Range

The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).

Server Specifications

This section lists the technical specifications for the server and includes the following sections:

Physical Specifications

The following table lists the physical specifications of the server.
Description
Height
Width
Depth
Weight (fully loaded chassis)

Environmental Specifications

The following table lists the environmental specifications of the server.
Description
Temperature, operating
universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.
UNC when you use the supplied slide rails.
Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide
Specification
1.7 in. (4.3 cm)
16.9 in. (42.9 cm)
29.8 in. (75.8 cm)
SNS 3515: 37.9 lb. (17.2 Kg)
SNS 3595: 39.9 lb. (18.1 Kg)
Specification
32 to 104°F (0 to 40°C)
(Operating, sea level, no fan fail, no CPU throttling,
turbo mode)
Equipment Requirements
13