Operation - Makita 6953 Instruction Manual

1
2
1. Socket
2. Anvil
1
1. Hook
2. Expand

OPERATION

Installing or removing socket
001644
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
Hook
The hook is convenient for temporarily hanging the tool. This
can be removedwithout using a tool.Thiscan be installedon
either side of the tool.
Installing and removing hook
Expand the upper part of the hook in both directions and
001645
remove it. To install the hook, follow the removal procedure
in reverse.
2
The proper fastening torque may differ depending upon the
kind or size of the bolt, the material of the workpiece to be
fastened, etc. The relation between fastening torque and fas-
tening time is shown in the figure.
7