Binding Cables; Affixing The Stand Hole Protection Covers - Sharp PN-C603D Operation Manual

The supplied cable clamps (affixing type) can be used to clamp the power cord, the USB cable and cables connected to the
back of the monitor.
Caution
• Attach the supplied cable clamps to a flat surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Be sure to clamp the USB cable and the supplied power cord (PN-C703B only) using the supplied cable clamp. When clamping
the power cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively.
The cable clamp also can be used to bundle cables (connected to the back of the monitor) with the USB cable.
(PN-C703B only)

Affixing the Stand Hole Protection Covers

Binding Cables

Cable clamp
(affixing type)
Affixing point
Power cord (Supplied)
Affixing point
Cable
USB cable
After installing the monitor, affix the stand hole protection
covers.
1. Peel off the backing sheet and affix the cover on the
monitor.
15
E