Cisco 3421V Installation Manual page 22

Viewing Live Video
Table 4-4
Control
Hotspot Pan/Tilt
button
Save Snapshot button Captures and saves a the current video image as a .gif file or a .jpg file in the
Flip button
Mirror button
Restore button
Full Screen button
Motion detection
Up Arrow toggle
button
Down Arrow toggle
button
Cisco Video Surveillance 3421V IP Camera Installation Guide
4-6
Camera Video & Control Window Controls (continued)
Description
Click this latch button to enable the hotspot pan/tilt feature, which lets you pan
and tilt the IP camera toward a point that you click in the video display.
To perform a hotspot pan/tilt action, engage the Hotspot Pan/Tilt button, then
click the video image at the location toward which you want the IP camera to
pan and tilt.
This feature require that the IP camera be installed with a pan/tilt mount that
supports the Pelco D protocol and that pan and tilt functions are enabled.
location of your choice and with the file name of your choice.
When you click this button, the Snapshot window appears. Click Save and
follow the on-screen prompts to save the image with the name and in the
location that you want.
Rotates the video image by 180 degrees.
Reverses the video image.
Displays the default video image, which is not rotated and not reversed.
Displays the video image in full screen mode.
To return to normal display mode, click the full screen image.
Click the Up Arrow to display the motion detection controls. The button
changes to the Down Arrow button.
Click the Down Arrow button to hide the motion detection controls. The button
changes to the Up Arrow button.
Chapter 4 Camera Management
OL-28643-01