Cisco 3421V Installation Manual page 13

Chapter 2 Camera Installation
Use the included screwdriver to tighten the four dome cover screws to secure the dome cover to the
Step 12
IP camera. Make sure all parts of the IP camera are securely installed.
Step 13 If you have an external input device, such as a sensor, connect it to the terminal block.
What to do next
After you install the IP camera, follow the instructions in
IP Camera"
OL-28643-01
to access the IP camera through your network.
Installing the IP Camera to a Ceiling or Wall
Chapter 3, "Performing the Initial Setup of the
Cisco Video Surveillance 3421V IP Camera Installation Guide
2-7