Table of Contents
Advertisement
7. Select the IP address setting:
• Get dynamically from existing router: The other router on the network assigns
an IP address to the Orbi router while the Orbi router is in AP mode.
• Enable fixed IP settings on this device (not recommended): Use this setting
if you want to manually assign a specific IP address to the Orbi router while it is
in AP mode. Using this option effectively requires advanced networking
experience.
NOTE: To avoid interference with other routers or gateways in your network,
we recommend that you use different WiFi settings on each router and
gateway. If the other router or gateway is also a WiFi access point, you could
turn off the WiFi radio on the other router or gateway and use the Orbi
router only for WiFi client access.
8. Click the Apply button.
The IP address of the Orbi router changes, and you are disconnected.
9. To reconnect, close and restart your browser and enter orbilogin.com.
Manage the WiFi Settings
Whole Home Quad-Band Mesh WiFi 7 System
75
User Manual
Advertisement
Table of Contents
