Edit A Port Triggering Service - NETGEAR Orbi RBE971 User Manual

The page adjusts.
6. Click the Add Service button.
The Port Triggering - Services page displays.
7. In the Service Name field, type a descriptive service name.
8. In the Service User menu, select Any, or select Single address and enter the IP
address of one computer:
• Any: This selection (the default) allows any computer on the local area network
(LAN) to use this service.
• Single address: This selection restricts the service to a particular computer om
the LAN. Enter the IP address in the field that becomes available with this selection
from the menu.
9. From the Service Type menu, select the service type, either TCP or UDP.
10. In the Triggering Port field, enter the number of the outbound traffic port that must
open the inbound ports.
11. From the Connection Type menu, select the inbound connection type, TCP, UDP,
or TCP/UDP.
If you are not sure, select TCP/UDP.
12. Enter the inbound connection port numbers the Starting Port, and Ending Port
fields.
For a single port, enter the same number in each field.
13. Click the Apply button.
The service is now in the Portmap Table.

Edit a port triggering service

To edit a port triggering service:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
Customize Internet Traffic Rules
for Ports
Whole Home Quad-Band Mesh WiFi 7 System
135 User Manual