Section 5
Using the HMI
5.1.7
Adjusting the display contrast
Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
•
To decrease the contrast, press simultaneously
Set the parameter ContrastLevel via Main menu /Configuration /HMI /Screen /SCREEN:1 to
permanently change the display contrast.
5.1.8
Changing the local HMI language
1.
Select Main menu /Language /LANGUAGE:1 and press
2.
Change the language using
3.
Press
4.
Commit the changes.
5.1.9
Navigating in the menu
Navigate the menus and change the display views on the screen with the keypad.
•
To move up or down in a menu, press
•
To move downwards in the menu tree, press
•
To move upwards in the menu tree, press
•
To enter setting mode, press
•
To leave setting mode without saving, press
5.1.9.1
Menu structure
The Main menu contains main groups which are divided further into more detailed submenus.
•
Control
•
Events
•
Measurements
•
Disturbance records
•
Settings
•
Configuration
•
Diagnostics
•
Test
•
Clear
•
Authorization (only if authority is activated)
•
Language
40
The display contrast is not stored in any memory if changed using the keys from local HMI.
After an auxiliary power failure, the display contrast is restored to set value for parameter
ContrastLevel.
or
to confirm the selection.
.
© 2017 - 2023 Hitachi Energy. All rights reserved
and
.
and
.
.
.
or
.
.
.
.
1MRK500127-UUS Rev. M
AMU0600410 v7
GUID-3DF3CD65-3EC2-41AF-B538-5CDA0C34E804 v9
AMU0600412 v7
AMU0600413 v10
670 series
Operation manual