Advertisement

Quick Links

aeg.com/register
EN User Manual | Dishwasher
FSE84607P
aeg.com\register

Advertisement

Table of Contents
loading

Summary of Contents for AEG FSE84607P

  • Page 1 EN User Manual | Dishwasher FSE84607P aeg.com\register...
  • Page 2: Table Of Contents

    FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning...
  • Page 4: Safety Instructions

    • Follow the maximum number of 13 place settings. • The appliance door should not be left in an open position to avoid the tripping hazard. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
  • Page 5 Make sure that there is access to the • Do not drink and play with the water in the mains plug after the installation. appliance. • Do not pull the mains cable to disconnect • Do not remove the dishes from the the appliance.
  • Page 6: Installation

    Authorized Service Centre to replace it with 3.1 Building in the new one. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher min. 550 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
  • Page 7: Product Description

    4. PRODUCT DESCRIPTION Ceiling spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container Air vent 4.1 Beam-on-Floor • The red light flashes when the appliance has a malfunction.
  • Page 8: Control Panel

    5. CONTROL PANEL On/Off button / Reset button Option buttons (EXTRAS) Delay start button AUTO Sense program button Display MY TIME program selection bar 5.1 Display 5.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is.
  • Page 9: Programme Selection

    6. PROGRAMME SELECTION 6.1 MY TIME the temperature and quantity of water as well as the wash duration. MY TIME selection bar allows to select a suitable dishwashing cycle based on 6.3 EXTRAS programme duration. You can adjust the programme selection to your needs by activating EXTRAS.
  • Page 10 6.4 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick Crockery, cutlery Fresh • Dishwashing 50 °C • ExtraPower • Intermediate rinse • GlassCare • Final rinse 45 °C • SprayZone • AirDry Crockery, cutlery Fresh, lightly •...
  • Page 11: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) Programme 1)2) Quick 10.4 0.600 11.7 0.845 1h 30min 11.5 1.000 2h 40min 12.0 1.009 10.5 0.735 AUTO Sense 11.9 0.964 Machine Care 0.636 The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 12 settings. For each setting, a dedicated bar of The lights related to the Previous, OK and the ECOMETER flashes. Next are on. The order of the basic settings presented in How to change a setting the table is also the order of the settings on the ECOMETER: Make sure the appliance is in setting mode.
  • Page 13 Water hardness German de‐ French de‐ mmol/l mg/l (ppm) Clarke de‐ Water softener grees (°dH) grees (°fH) grees level 47 - 50 84 - 90 8.4 - 9.0 835 - 904 58 - 63 43 - 46 76 - 83 7.6 - 8.3 755 - 834 53 - 57...
  • Page 14 Each performed softener rinse (possible more than one in the same cycle) may prolong the programme duration by another 5 minutes when it occurs at any point at the beginning or in the middle of a programme. All the consumption values mentioned in this section are determined in line with the currently applicable standard in laboratory conditions with water hardness...
  • Page 15: Before First Use

    is then selected automatically after you When the latest programme selection is activate the appliance. disabled, the default programme is ECO. 8. BEFORE FIRST USE 1. Make sure that the current level of the 4. Carefully shake the funnel by its handle to water softener agrees with the get the last granules inside.
  • Page 16: Daily Use

    4. Close the lid. Make sure that the lid locks CAUTION! into position. Only use rinse aid designed specifically for dishwashers. Fill the rinse aid dispenser when the 1. Open the lid (C). indicator (A) is clear. 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''.
  • Page 17 2. Press the button dedicated to the option 3. Close the appliance door to start the you want to activate. countdown. • The light related to the button is on. During the countdown, you cannot change • The display shows the updated the delay time and the programme selection.
  • Page 18: Hints And Tips

    • When the programme is completed. • After 5 minutes if a programme was not started. If the door is opened for more than 30 seconds during the drying phase, the 9.10 End of the programme running programme ends. It does not happen if the door is opened by the When the programme is complete, the AirDry function.
  • Page 19 softened water results in detergent • The programme is suitable to the type of residues on the dishes. Adjust the amount load and the degree of soil. of detergent based on the water hardness. • The correct quantity of detergent is used. Refer to the instructions on the detergent 10.5 Loading the baskets packaging.
  • Page 20: Care And Cleaning

    11. CARE AND CLEANING 11.2 Internal cleaning WARNING! • Clean the appliance interior with a soft Before any maintenance other than damp cloth. running the programme Machine Care, • Do not use abrasive products, abrasive deactivate the appliance and disconnect cleaning pads, sharp tools, strong the mains plug from the main socket.
  • Page 21 5. Make sure that there are no residues of food or soil in or around the edge of the 1. Turn the filter (B) counterclockwise and sump. remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
  • Page 22 CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
  • Page 23: Troubleshooting

    4. To install the spray arm back, press the 1. Move the upper basket to the lowest level spray arm upwards and simultaneously to reach the spray arm more easily. turn it counterclockwise until it locks into 2. To detach the spray arm (C) from the place.
  • Page 24 Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. •...
  • Page 25 Problem and alarm code Possible cause and solution The displayed programme duration • Refer to the consumption values table in the chapter "Programme se‐ is different than the duration in the lection". consumption values table. The remaining time in the display in‐ •...
  • Page 26 12.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaf‐ let. • Use more intensive washing programme. • Activate the SprayZone option to wash items with heavy or stubborn soil.
  • Page 27: Technical Information

    Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the tableware, • The level of salt is low, check the refill indicator. on the tub and on the inside of the •...
  • Page 28: Environmental Concerns

    13.2 Link to the product information all other documents provided with this sheet - for the UK only appliance. It is possible to find information related to the The QR code on the energy label supplied performance of the product in the EU EPREL with the appliance provides a web link to the database using the link https:// product information sheet.
  • Page 32 117834380-A-272023...

Table of Contents