Displaying Total Number Of Copies - Sharp AR-151 Operation Manual
Digital laser copier
Hide thumbs
Also See for AR-151:
- Service manual (170 pages) ,
- Operation manual (52 pages) ,
- Operation manual (44 pages)
Table of Contents
Advertisement
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
01C-3_AR151EX.p65
Downloaded from:
http://www.usersmanualguide.com/
Press the print (
) key. The entered program number will be steadily lit and the
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
parameter number will blink on the right of the display.
Program
Mode
No.
1
Auto clear time
2
Preheat mode
3
Auto power shut-
off timer
4
Stream feeding
mode
5
Auto power shut-
off mode
Factory default settings are indicated with an asterisk (*).
Press the print (
) key. The right-hand number in the display will be steadily lit and
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (
) or dark (
Press the clear (
) key to reset the display to zero.
Press and hold down the clear (
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
21
Parameters
0
OFF
1
30 sec. * 2
3
90 sec.
4
120 sec.
0
30 sec.
1
60 sec. * 2
0
2 min.
* 1
5 min.
3
30 min.
4
60 min.
0
OFF
* 1
ON
0
OFF
* 1
ON
) key to return to the normal copy mode.
) key for approximately 5 seconds. The total number
14/11/00, 19:26
USER PROGRAMS
) key. The entered
60 sec.
5
10 sec.
90 sec.
2
15 min.
5
120 min.
) key. The
21
3
Advertisement
Table of Contents
