Displaying Total Number Of Copies - Sharp AL-1217D Operation Manual

Program
No.
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
6
Press the light (
copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press and hold down the clear (
The total number of copies will appear in two steps, each with three
digits.
Example: Total number of copies is 1,234.
56
Downloaded from:
Mode
1 Auto clear time
2 Preheat mode
Auto power shut- off
3
timer
Stream feeding
4
mode
Auto power shut- off
5
mode
Resolution of AUTO
6
& MANUAL mode
Program No. 4 can be selected on when your unit has the SPF/
RSPF.
To change the setting or to set another mode, press the clear
( ) key. The unit will return to step 2.
http://www.usersmanualguide.com/
0 OFF, 1
*3 60sec., 4
*0 30sec., 1
0 2min., *1
3 30min. 4
0 OFF, *1
0 OFF, *1
*0 300dpi, 1
) key. The right-hand number in the display
) or dark ( ) key to return to the normal
) key for approximately 5 seconds.
Parameters
10sec., 2 30sec.
90sec., 5 120sec.
60sec., 2 90sec.
5min., 2 15min.
60 min. 5 120min.
ON
ON
600dpi