Makita DCL184 Instruction Manual page 9

Installing the paper filter
Use the dust stopper also when installing paper filter.
Be careful not to take the upper side for the lower side
by mistake because they are different each other.
1
2
Fig.11
► 1. Upper side of the dust stopper 2. Lower side of
the dust stopper
1. Unfold the entrance of the paper filter before
setting it on the dust stopper.
Fig.12
2. Insert the protrusion of the paper filter into the
groove on the dust stopper as shown in the figure.
The paper filter does not have distinction between the
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
2
Fig.13
► 1. Dust stopper 2. Groove 3. Paper filter
1
2
1
3
3. Overlap the frame of dust stopper with that of the
paper filter.
Fig.14
4.
Place the dust stopper and the paper filter
together into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way into
the slots in the cleaner cavity.
1
Fig.15
► 1. Slot
5. Place the entire container part of the paper filter
inside the tool itself.
Fig.16
9 ENGLISH