Makita DCL184 Instruction Manual page 8

Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
1
2
Fig.5
► 1. Upper side of the dust stopper 2. Lower side of
the dust stopper
1. Insert the protrusion of the dust bag into the
groove on the dust stopper as shown in the figure.
The dust bag does not have distinction between the
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
2
Fig.6
► 1. Dust stopper 2. Groove 3. Dust bag
2.
Overlap the frame of dust stopper with that of the
dust bag.
Fig.7
1
2
1
3
3. Place the dust stopper and the dust bag together
into the cleaner cavity in the same direction of arrow on
the dust stopper. Insert them all the way into the slots in
the cleaner cavity.
1
Fig.8
► 1. Slot
4.
Place the entire cloth part of the dust bag inside
the cleaner itself.
Fig.9
5. Close the dust case cover completely.
1
Fig.10
► 1. Dust case cover
NOTE: When the dust bag is not installed in the
cleaner, the dust case cover does not close completely.
8 ENGLISH