Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Open the latch and disconnect the touchpad cable from the system board.
2. Peel the tapes that secure the touchpad to the keyboard shield.
3. Remove the four screws (M2x2) that secure the touchpad to the palm rest assembly.
4. Lift the touchpad, along with the cable, at an angle from under the touch-pad bracket off the palm-rest assembly.
Removing the touchpad
computer. After working inside your computer, follow the instructions in
33
After
www.dell.com/
Removing the touchpad
51
Advertisement
Table of Contents
