Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the battery with the screw holes on the palm-rest assembly and keyboard shield.
2. Replace the four screws (M2x3) that secure the battery to the palm-rest assembly and keyboard shield.
3. Connect the battery cable to the system board.
Post-requisites
Replace the
base
cover.
Replacing the battery
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Replacing the battery
6
15
Advertisement
Table of Contents
