Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
Procedure
1. Close the display and turn the computer over.
2. Loosen the six captive screws that secure the base cover to the palm-rest assembly.
3. Remove the 4 screws (M2.5x5) that secure the base cover to the palm-rest assembly.
4. Using a plastic scribe, pry and release the tabs on the base cover from the slots on the palm-rest assembly.
5. Lift the base cover from the palm-rest assembly.
Removing the base cover
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Removing the base cover
3
11
Advertisement
Table of Contents
