Yamaha Grizzly 700 2011 Manual page 53

ITEM
Front brake
Rear brake
Throttle lever
Control cables
Wheels and tires
Brake pedal
Brake levers
Axle boots
Chassis fasteners
Instruments, lights and
switches
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add specified brake fluid to
specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check pedal free play, and adjust if necessary.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add specified brake fluid to
specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check lever free play, and adjust if necessary.
• Make sure that operation is smooth. Lubricate if necessary.
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
• Check for cracks or damage, and replace if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Check operation, and correct if necessary.
ROUTINE
5-2
PAGE
5-3, 8-46, 8-48, 8-50
5-3, 8-46, 8-48, 8-50,
8-50
5-4, 8-45
8-53
5-4
8-54
8-53
8-52
5-7
5-7
5