1. Differential gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
8
Tightening torque:
Differential gear oil drain bolt:
9.8 Nm (0.98 m·kgf, 7.1 ft·lbf)
5. Refill with the recommended differential gear
oil to the brim of the filler hole as shown.
NOTICE: Be sure no foreign material en-
ters the differential gear case.
2
1
1. Differential gear oil filler bolt
2. Gasket
3. Differential gear oil
4. Correct oil level
Recommended differential gear oil:
6. Check the oil filler bolt gasket for damage, and
7. Install the oil filler bolt and its gasket, and then
[ECB00411]
Tightening torque:
8-31
See page 10-1.
replace it if necessary.
tighten the bolt to the specified torque.
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1 2
3
4