Yamaha Grizzly 700 2011 Manual page 112

TIP
If the engine was started before checking the oil
level, be sure to warm up the engine sufficiently,
and then wait at least 10 minutes until the oil settles
for an accurate reading.
3. Remove the access cover by turning it coun-
terclockwise.
8
1. Access cover
4. Remove the engine oil dipstick, and then wipe
it off with a clean rag.
1. Engine oil dipstick
5. Insert the dipstick completely into the oil filler
hole, and then remove it again to check the oil
level.
TIP
The engine oil should be between the minimum
and maximum level marks.
8-23