Hob - Hints And Tips - Zanussi ZCV66050WA User Manual

The indicator appears when a cooking zone
is hot, but it does not function if mains power
is disconnected.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,

7. HOB - HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
The cooking results depend on the cookware
material
• recommended: aluminium, copper
• not recommended:stainless steel, cast
iron, glass
The bottom of the cookware must be as
thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Do not use cookware on the ceramic hob
with bases with pronounced edges or
ridges, e.g. cast iron pans. These could
scratch or scour the hob surface
permanently.
Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause a colour change on the glass-
ceramic surface.
To save energy and ensure that the hob
operates properly the cookware bottom must
have a suitable minimum diameter.
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
7.2 Minimum cookware diameter
Cooking Cookware diam‐
zone eter (mm)
Left rear Φ 145
Right rear Φ 180
Right front Φ 145
Left front Φ 180
7.3 Examples of cooking
applications
Heat Application:
setting:
1 Keeping warm
2 Gentle simmering
3 Simmering
4 Frying / browning
5 Bringing to the boil
6 Bringing to the boil / quick frying / deep-
frying
Power (W)
1200
1700
1200
1700
ENGLISH 11