Answer A Call On Your Ata Phone; Answer Call Waiting On Your Ata Phone; Put A Call On Hold On Your Analog Phone; Forward Your Analog Phone Calls To Another Number - Cisco ATA 191 User Manual

Analog telephone adapter

Hide thumbs Also See for ATA 191:

Table of Contents

Answer a call on your ATA phone

Your analogue phone (ATA) works just like a Cisco IP phone.

Procedure

When your analog phone rings, pick up the handset to answer the call.

When you're on an active call, you know that a call is waiting when you hear a single beep.

Procedure

Step 1

Perform a hook flash to speak with another caller who is calling you.

You connect to the second caller and put the first caller on hold.

Step 2

(Optional) To speak with the first caller, perform a hook flash again.

Subsequent hook flashes toggle you between the two callers. You can't create a conference this way.

You can put an active call on hold and then resume the call when you're ready.

Procedure

Step 1

While on an active call, perform a hook flash.

Step 2

To return to the call, either:

• Perform another hook flash.

• Hang up the handset. Pick up the handset when your phone rings.

If you're going to be away from your desk, but don't want to miss an important call then forward your calls

to another phone.

Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware

Calls

Table of Contents

Ata 192