Advertisement
3. Using the Linksys Phone Adapter as an ATA
Configuration 1-
IMPORTANT NOTE:
Your Linksys Phone Adapter is pre-configured as a DHCP client for use with your home router. If your router is not configured to
support DHCP, please contact Customer Care at http://joip.custhelp.com/ for further assistance.
`
PC
Linksys
Phone
Adapter
INSTALLATION:
Step I:
Connect your Linksys Phone Adapter to your home network/router
1.
Connect the phone: Connect a telephone to "PHONE 1" of the two phone ports (as shown in the
diagram below) on the Linksys;
2. Connect the home router: Use the Ethernet cable provided in the packaging and connect the
"INTERNET" port (as shown in the diagram below) on the Linksys to an spare Ethernet port on
your home router;
3.
Connect the power: Connect the power cord to the receptacle on the Linksys marked "POWER"
(as shown in the diagram below), and the power adapter to an electrical outlet.
6
If you use a broadband modem (ADSL modem or cable modem)
Standard
Home
Router
Ethernet
cable
provided in
the package
ADSL or Cable
Modem
www.joip.com
Internet
Advertisement
