Table of Contents
Advertisement
HTC T6/RT6/X6/RX6
Wet grinding with water is used when grinding difficult to grind floors. It is also used to obtain
a greater performance or lower temperature during grinding.
Grinding
Set the handle to the working position. See
page 32.
Connect the water using the quick release
coupling on the rear of the machine. For
pressure and maximum flows, see Technical
Data page 63.
An electrically controlled proportional valve
controls the water flow.
Start the water flow by pressing the button
on the control panel. Increase and decrease
the water flow using
The water is distributed via slits in the hose
under the cover.
D002998, 02.00
+
and
-
respectively.
Accessories
53
Advertisement
Table of Contents
