Grinding; Manoeuvring Via The Control Panel - Husqvarna HTC T6 Operator's Manual

HTC T6/RT6/X6/RX6

6 Grinding

Connect a dust extractor to the machine. For available models of dust extractors, go to HTC's
website www.htc-floorsystems.com
Place the handle to the working position, see page 32.

6.1 Manoeuvring via the Control Panel

During manual grinding, the machine is run forwards across the floor surface and the
processing is controlled via the control panel.
For description of the control panel, see Description of Controls – Control Panel (HMI), see
Description of Controls – Control Panel (HMI) page 25.
38
for more information.
WARNING
Risk for personal injury.
Do not let the cable come into contact with the rotating tools.
NOTE
Inspect the floor carefully and remove any objects sticking up,
such as, for example, reinforcement rods or bolts, and any
debris that could get stuck in the machine or be thrown out.
Grinding
D002998, 02.00