Sharp Zaurus SL-5500 Software Manual page 15

7.
When the desired settings are made, click the OK button to return to the
Configuration dialog box.
8.
If necessary, repeat the above procedure for each of the device applications you
want to synchronize. Then click the OK button to save the specifications and
exit the Configuration dialog box.
Now the configuration of the synchronization option is completed. Perform the
following steps to carry out the synchronization.
9.
Turn the device power on.
10.
Place your device on the Docking Station connected to your PC.
11.
Click the Intellisync icon and then select Synchronize from the Intellisync
menu.
12.
Click the OK button.
The synchronization process begins, and the progress dialog box appears.
Note:
• Synchronization process can also be carried out by pressing the SYNC button
on the Docking Station or clicking the Synchronize icon on the Intellisync
launcher in step 11.
• If you connect the device to your PC via the optional Serial Cable and perform
synchronization by pressing the SYNC button on the Docking Station, make
sure to turn the device on before pressing the SYNC button on the Docking
Station.
• Tapping the Cancel button on the device's screen does not stop the
synchronization. To stop the synchronization, click the Cancel button on the
progress dialog box on your PC. Clicking the Cancel button on the progress
dialog box does not stop the synchronization until the section being
synchronized has been completed.
• Do not operate the device during synchronization.
• Do not press the SYNC button on the Docking Station during synchronization.
• Perform the following if your PC does not recognize the device placed on the
Docking Station.
• Remove the device from the Docking Station and place it on the Docking
Station again.
• With your PC disconnected from the network, restart it and then check that
the connection is established between the device on the Docking Station and
a PC. If the problem remains, contact your network administrator. Check also
that the PDA IP Address set on the Communication Options screen is the
same as the IP address of the device.
9
QUICK START