NETGEAR Wireless Router Setup Manual
Default Factory Settings
When you first receive your wireless router, the default factory settings are shown below. You can
restore these defaults with the Factory Default Restore button on the rear panel. After you install
the wireless router, use the procedures below to customize any of the settings to better meet your
networking needs.
Wireless Access List (MAC Filtering)
Warning: The Network Name (SSID) and passphrase are case sensitive. Typing nETgear for the
SSID will not work.
4-6
WIRELESS FEATURE
Wireless Access Point
SSID broadcast
Network Name (SSID)
WPA and WEP Security
September 2004
DEFAULT SETTING
Enabled
All wireless stations allowed
Enabled
NETGEAR
Disabled
Optimizing Wireless Connectivity and Security